TP-LINK TL-SG3210 사용자 설명서

 

195

 

Cluster Management function enables a network administrator to manage the scattered devices in 

the network via a management device. After a commander switch is configured, management and 

maintenance operations intended for the member devices in a cluster is implemented by the 

commander device. 

The cluster ndp command is used to configure NDP globally. To return to the 

default configuration, please use no cluster ndp command. NDP (Neighbor 

Discovery Protocol) is used to discover the information of the directly connected 

neighbor devices to support cluster establishing. An NDP-enabled device sends 

NDP packets regularly to neighbor devices as well as receives NDP packets 

from neighbor devices. An NDP packet carries the aging time, which indicates 

the period of the receiving devices to keep the NDP packet. 

cluster ndp timer {[ hello hello-time] [aging aging-time ]} 

no cluster ndp   

no cluster ndp timer {[ hello hello-time ] [ aging aging-time ]}  

hello-time  —— Hello Time, which is the interval to send NDP packets. Hello 

Time ranges from 5 to 254 in seconds. By default, it is 60. 

aging-time  ——  Aging Time, which is the period for the neighbor switch to keep 

the NDP packets from this switch. Aging Time ranges from 5 to 255 in seconds. 

By default, it is 180. 

Global Configuration Mode 

Enable NDP function globally, and configure Aging Time as 120 seconds, Hello 

Time as 50 seconds: 

TL-SG3424(config)# cluster ndp timer hello 50 aging 120