TP-LINK TL-SG3210 사용자 설명서
19
Parameter
vlan-id —— Specify IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
Command Mode
Global Configuration Mode
Example
Create VLAN Interface 2:
TL-SG3424(config)# interface vlan 2
name
Description
The name command is used to assign a description to a VLAN. To clear the
description, please use no name command.
description, please use no name command.
Syntax
name descript
no name
no name
Parameter
descript ——String to describe the VLAN, which contains 16 characters at most.
Command Mode
VLAN Configuration Mode（VLAN）
Example
Specify the name of VLAN 2 as “group1”:
TL-SG3424(config)# vlan 2
TL-SG3424(config-vlan)# name group1
switchport mode
Description
The switchport mode command is used to configure the Link Type for the
ports.
ports.
Syntax
switchport mode { access | trunk | general }
Parameter
access | trunk | general —— Link Types. There are three Link Types for the
ports.
ports.