TP-LINK TL-SG3210 사용자 설명서

 

47

 

minutes ——The timeout time, ranging from 5 to 30 in minutes. The value is 10 

by default.   

Global Configuration Mode   

Configure the timeout time of the switch as 15 minutes: 

TL-SG3424(config)# user idle-timeout 15 

The line command is used to enter the Line Configuration Mode and configure 

the allowed login user number of the switch. 

line [ console linenum | vty startlinenum endlinenum ] 

linenum  —— The number of users allowed to login through console port. Its 

value is 0 in general as there is only one console port on a switch. 

startlinenum ——The start serial number of the login user selected to configure 

the login mode and password, ranging from 0 to 15. 0 means the first login user 

number, 1 means the second, and the rest can be done in the same manner. 

endlinenum ——The end serial number of the login user selected to conifigure 

the login mode and password, ranging from 0 to 15. 0 means the first login user 

number, 1 means the second, and the rest can be done in the same manner. 

Global Configuration Mode 

Enter the Console port configuration mode and configure the console port 0: 

TL-SG3424(config)# line console 0 

Enter the Virtual Terminal configuration mode so as to prepare further 

configurations such as password and login mode for virtual terminal 0 to 5: