TP-LINK TL-SG3210 사용자 설명서

 

51

 

You can bind the IP address, MAC address, VLAN and the connected Port number of the Host 

together, which can be the condition for the ARP Inspection and IP Source Guard to filter the 

packets. 

The ip source binding command is used to bind the IP address, MAC address, 

VLAN ID and the Port number together manually.

You can manually bind the IP 

address, MAC address, VLAN ID and the Port number together in the condition 

that you have got the related information of the Hosts in the LAN. To delete the 

IP-MAC –VID-PORT entry from the binding table, please use no ip source 

binding index command. 

ip source binding hostname ip-addr mac-addr  vlan  vid  interface 

gigabitEthernet port { none | arp-detection } [ forced-source { arp-scanning | 

dhcp-snooping }] 

no ip source binding index idx 

hostname ——The Host Name, which contains 20 characters at most. 

ip-addr —— The IP Address of the Host. 

mac-addr —— The MAC Address of the Host. 

vid ——The VLAN ID needed to be bound, ranging from 1 to 4094.   

port ——The number of Ethernet port connected to the Host.   

none | arp-detection——The protect type for the entry. arp-detection indicates 

ARP detection; none indicates applying none. 

forced-source —— The source of the binding entry can be specified as 

arp-scanning or dhcp-snooping. It is multi-optional.   

idx —— The entry number needed to be deleted, ranging from 1 to 200. You can 

 command to get the idx. Pay attention to that, 

the entry number is the actual number in the binding table not arranged in an 

order.