TP-LINK TL-SG3210 사용자 설명서

 

70

 

The dot1x quiet-period command is used to enable the quiet-period function. 

To disable the function, please use no dot1x quiet-period command. 

Global Configuration Mode 

Enable the quiet-period function: 

The  dot1x timeout command is used to configure the quiet period and the 

supplicant timeout. To restore to the default, please use no  dot1x timeout 

command. 

dot1x timeout { quiet-period time | reauth-period time } 

no dot1x timeout { quiet-period | reauth-period } 

quiet-period time ——The value for Quiet Period, ranging from 1 to 999 in 

seconds. By default, it is 10. Once the supplicant failed to the 802.1X 

Authentication, then the switch will not respond to the authentication request 

from the same supplicant during the Quiet Period. 

reauth-period time ——The maximum time for the switch to wait for the 

response from supplicant before resending a request to the supplicant., ranging 

from 1 to 9 in second. By default, it is 3. 

Global Configuration Mode