TP-LINK TD-8811B 사용자 설명서

TD-8811/8811B

 

 

4

 

¾  ON/OFF: Turn on/off the ADSL2+ Router’s power. 

¾  POWER (9VAC/0.8A input): please do not use any unknown power adapter, otherwise your 

ADSL2+ Router may be damaged. 

¾  RESET (reset default): Press the reset button, then turn on the Router's power (keep the 

button pressed) for at least three seconds, it will restore the settings to the default factory 

configuration. 

¾  LAN: Connect with your computer’s NIC.     

¾  USB: Connect with your computer’s USB interface 

¾  LINE (WAN): Connect to the MODEM Port of Splitter or connect the telephone line. 

The procedure to install the Router can be described in the following steps: 

First Step: Connect the MODEM port of Splitter with the LINE port of the TD-8811/TD-8811B 

ADSL2+ ROUTER by telephone line.   

Second Step: Connect category 5 cable with RJ45 jacks to ADSL2+ Router’s LAN port and your 

computer’s NIC. Or connect USB cable to ADSL2+ Router’s USB port and your computer’s USB 

interface. 

Third Step: Plug one end of the AC Power Adapter into the Power jack on the Ethernet ADSL2+ 

Router and the other end to a standard electrical outlet. 

Last Step: Check the line connection to see if everything is ready. Power up finally.