Siemens SM2 monitoring system 사용자 설명서

U3585-J-Z125-8-76

253

SM2 reports

WAIT

The number of WAIT operations per second is incremented if:
–

reading from the file to main memory was initiated and the task
is waiting for the end of the read operation, or

–

writing from main memory to the file was initiated and the task
is waiting for the end of the write operation.

WAIT operations not combined with read or write operations are
ignored.

CHECK

The number of CHECK operations per second is incremented
whenever a check is made to see whether the preceding write
operation was performed properly (read-after-write check). Only
those read-after-write checks are counted which were initiated
together with a write operation.

READ

Number of READ operations per second

WRITE

Number of WRITE operations per second

D016ZE04 SM2 PRIVILEGED FILE  CYCLE:  120 S                  99-03-24  14:30:00

 -----+-----+-----+-----+-----+-------------------------------------------------
 WAIT |CHECK|READ |WRITE|TIME |   FILENAME
 -----+-----+-----+-----+-----+-------------------------------------------------
   0.0|  0.0|  0.0|  0.0|    *|:2OSX:$TSOS.TSOSCAT
   0.0|  0.0|  0.0|  0.0|    *|:2OSW:$TSOS.TSOSCAT
   0.0|  0.0|  0.0|  0.0|    *|:2OS2:$TSOS.TSOSCAT
   0.0|  0.0|  0.0|  0.0|    *|:2SO6:$TSOS.TSOSCAT
   0.0|  0.0|  0.0|  0.0|    *|:2OS7:$TSOS.TSOSCAT
   0.0|  0.0|  0.0|  0.0| 16.3|:2ORZ:$TSOS.TSOSCAT
   0.5|  0.0|  0.5|  0.0|  2.4|:2OSQ:$TSOS.TSOSCAT
   0.0|  0.0|  0.0|  0.0| 21.2|:2OSL:$TSOS.EQUISAMQ
   0.0|  0.0|  0.0|  0.0|    *|:2OS6:$TSOS.SYSEAM
   0.0|  0.0|  0.0|  0.0|    *|:2OSX:$TSOS.SYSEAM
   0.0|  0.0|  0.0|  0.0|    *|:2OS2:$TSOS.SYSEAM
   0.0|  0.0|  0.0|  0.0|    *|:2OS7:$TSOS.SYSEAM
   0.0|  0.0|  0.0|  0.0| 13.6|:2OS6:$NEI.SM2.SAM.MANUAL.V13.0
 -----+-----+-----+-----+-----+-------------------------------------------------