Hitachi CP-X2521WN 사용자 설명서

15

Connecting to a power supply

1.

Put the connector of the power cord into the 
AC IN

 (AC inlet) of the projector.

2.

Firmly plug the power cord’s plug into the 
outlet. In a couple of seconds after the 
power supply connection, the POWER 
indicator will light up in steady orange.

►Please use extra caution when connecting the power cord, as 

incorrect or faulty connections may result in re and/or electrical shock.
• Do not touch the power cord with a wet hand.
•  Only use the power cord that came with the projector. If it is damaged, consult 

your dealer to get a new one. Never modify the power cord. 

•  Only plug the power cord into an outlet whose voltage is matched to the power 

cord. The power outlet should be close to the projector and easily accessible. 
Remove the power cord for complete separation.

•  Do not distribute the power supply to multiple devices. Doing so may overload 

the outlet and connectors, loosen the connection, or result in re, electric shock 
or other accidents.

•  Connect the ground terminal for the AC inlet of this unit to the ground terminal 

of the building using an appropriate power cord (bundled).

WARNING

Please remember that when the DIRECT POWER 
ON function activated (

53), the connection of the 

power supply make the projector turn on.

Setting up

►This product is also designed for IT power systems with a phase-to-

phase voltage of 220 to 240 V.

NOTICE