Toshiba B-EP2DL 사용자 설명서

 

EO18-33024 

 

3. TROUBLESHOOTING 

3- 1 

The printer is not turned 
on. 
 

1. The battery is not loaded correctly.
2. The battery terminal is 

disconnected from the soldering 
part. 

3. CPU PC board ass'y failure or 

Drive PC board ass'y failure 

 

1. Re-load the battery correctly. 
2. Replace the battery terminal. 
 
 
3. Replace the CPU PC board ass'y or 

the Drive PC board ass'y. 

 

The printer does not print 
media. 
(The status indicator 
blinks in red.) 
 

1. The media roll is not loaded 

correctly. 

2. The media cover is not closed 

completely. 

3. The media is jammed in the 

printer. 

4. The print head FPC harness or the 

print head 
element is broken. 

5. The print head temperature 

reached the 
upper limit of the operating 
temperature. 

6. Flash ROM write error or erase 

error 
occurred. 

7. There is insufficient area in the 

flash ROM. 

 
8. The print mode is not selected 

correctly. 

 

1. Re-load the media roll correctly. 
 
2. Close the media cover completely. 
 
3. Remove the jammed media and re-

load the media roll correctly. 

4. Replace the print head FPC harness 

or the print head ass'y. 

 
5. Open the media cover and allow the 

print head to cool. 

. 
 
6 . Open the media cover and close it 

again. 
Replace the CPU PC board ass'y. 

7. Open the media cover and close it 

again. 
Erase the data. 

8. Open the media cover and close it 

again. 

Send the correct print mode from the PC 

or handy terminal. 

The printer does not print 
media. 
(The status indicator 
Blinks in green or orange.) 
 

1. A communication error occurred. 
 

1. Check that the interface cable is 

connected firmly. 
Check the communication parameters.

The printer does not print 
media. 
(The status indicator lights 
in red.) 
 

1. The battery voltage is low. 
 

1. Turn off the printer and replace the 

battery with a fully charged one. 

 

The printer does not print 
media. 
(The status indicator lights 
in orange.) 
 

1. The battery is nearly end. 
 

1. Replace the battery with a fully 

charged one as soon as possible. 

 

The [FEED] button does 
not function. 
 

1. The [FEED] button is depressed 
incompletely. 

 

1. Press the [FEED] button more 

strongly. 
Replace the CPU PC board ass'y or 
Drive PC Board.