Toshiba B-SX4T-GS20-QM-R 사용자 설명서

 

- 269 -

Detail Status 

LCD Message of   

Upper Line 

(English) 

Printer Status 

Auto Status   

Transmission 

Status 

Request  

Command 

The head was closed with the head open. 

00 

00 

The head was opened in the online mode. 

01 

01 

Operating (Analyzing command, drawing, printing, 
feeding) 

– 02 

In a pause state 

– 

04 

Waiting for stripping 

– 

05 

Display of error message 
(See NOTE 1.)

 

A command error was found in analyzing the 
command. 

06 06 

A parity error or framing error occurred during 
communication by RS-232C 

07 07 

A paper jam occurred during a paper feed. 

11 

11 

An abnormal condition occurred at the cutter. 

12 

12 

The label has run out. 

13 

13 

The ribbon has run out. 

14 

14 

An attempt was made to feed or issue with the 
head open (except the [FEED] key) 

15 15 

A broken dot error has occurred in the thermal 
head. 

17 17 

The thermal head temperature has become 
excessively high. 

18 18 

An abnormal condition occurred in the sensor for 
determining the torque for the ribbon motor. 

21 21 

An overflow error has occurred in the rewinder. 

22 

22 

Ribbon near end state (Online) 

– 

27 

Ribbon near end state (In a pause state) 

– 

28 

Ribbon near end state (Operating) 

– 

29 

A label issue has been completed normally. 

40 

– 

A feed has been completed normally. 

41 

– 

A head broken dots check has been completed 
normally. 

00 – 

SAVING  #### &&&&  In writable character or PC command save   

– 

55 

mode  

 

An error has occurred in writing data into memory 
for storage. 

50 50 

An erase error has occurred in formatting memory 
for storage. 

51 51 

Saving failed because of the insufficient capacity of 
memory for storage. 

54 54 

A momentary power interruption has occurred. 

– 

– 

The memory card for storage is being initialized.   
(Initialization is carried out for a max. of 
approximately 15 seconds)