Panasonic DA-PC700 사용자 설명서
194
Menu Item
Description
Memory Changes
• PostScript Memory
(con't...)
Sets the memory capacity for the use of PostScript. The printing speed may be
increased when the memory capacity is increased.
Available memory capacity: 4.50-32.00 MB in increments of 0.25 MB (4.5 MB*).
Available memory capacity: 4.50-32.00 MB in increments of 0.25 MB (4.5 MB*).
Delete Stored Print Job
Delete stored print jobs listed according to the types of print jobs:
• Secured Print
• Sample Print
• Secured Print
• Sample Print
Initialize Memory/Disk
Executes the initialization of NV memory and hard disk. It can also execute
system reset.
• Initialize Memory
system reset.
• Initialize Memory
Executes initialization of NV memory. NV memory is the nonvolatile
memory that maintains the printer setting contents even after the power has
been switched off.
memory that maintains the printer setting contents even after the power has
been switched off.
• Initialize Print Meter
Executes initialization of Print Meter memory.
• All Hard Disks
• Hard Disk Partition 1
• Hard Disk Partition 2
• Hard Disk Partition 3
• Hard Disk Partition 1
• Hard Disk Partition 2
• Hard Disk Partition 3
Executes initialization of the hard disk or the hard disk partition 1-3
• If the distributed memory capacity cannot be maintained and memory becomes insufficient when
the port status is at Enable, the following processes will be automatically executed:
A. Change and allocate the setting values of the various memories (e.g. Receive buffer).
B. If allocation in A is not possible, set the status of the Ethernet port to Disable and reallocate.
A. Change and allocate the setting values of the various memories (e.g. Receive buffer).
B. If allocation in A is not possible, set the status of the Ethernet port to Disable and reallocate.
• When the interface board is installed, disable the port status of the port not in use.
• After removing the RAM module and switching on the power, the above process will be executed
even if the memory becomes insufficient compared with the previous memory setting.
13.2 System/Meter Settings
* factory setting