Epson PM 290 사용자 설명서
7
4
Slide the edge guides outward.
5
Create a stack of up to 20 sheets of paper and
separate the sheets slightly by fanning them.
separate the sheets slightly by fanning them.
6
Place your paper into the slot between the edge
guides with the glossy or whiter side up. Slide the
edge guides inward slightly.
guides with the glossy or whiter side up. Slide the
edge guides inward slightly.
Note: Load a maximum of 20 sheets at a time. Load
your paper glossy or whiter side up to prevent smearing.
your paper glossy or whiter side up to prevent smearing.
7
Store any unused paper in the original package
and keep it flat in a dry area to prevent curling.
and keep it flat in a dry area to prevent curling.
Note: When you need more paper, order a PictureMate 200
Series Print Pack. See page 49 for more information.
Series Print Pack. See page 49 for more information.
Inserting Your Memory Card
1
Press the
On button to turn on PictureMate.
2
Press the corner of the output tray to open it, if
necessary.
necessary.
3
Insert the memory card into the correct slot, as
shown on the next page. Insert just one card at a
time.
shown on the next page. Insert just one card at a
time.
Note: PictureMate can’t read multiple cards at once.
4
Push the card in carefully until it stops (it won’t go
in all the way).
in all the way).
When the card is in, the memory card light comes
on and begins to flash.
on and begins to flash.
Caution: Do not remove a card while the memory card
light is flashing; you may lose photos on your card.
light is flashing; you may lose photos on your card.
Load glossy or
whiter side up
whiter side up