Lexmark 640 사용자 설명서

다운로드
페이지 125
Administrative support
96
9
Administrative support
Adjusting operator panel brightness and contrast
If you are having trouble reading your operator panel display, the LCD contrast and brightness can be adjusted through the 
utilities menu.
The LCD Brightness and LCD Contrast settings are adjusted separately. To change the LCD Brightness or LCD Contrast 
settings:
1
Make sure the printer is on.
2
Press 
 on the operator panel.
3
Press 
 until the 
 appears next to Settings, and then press 
.
4
Press 
 until the 
 appears next to Utilities Menu, and then press 
.
5
Press 
 until the 
 appears next to the LCD setting you want to change, and then press
.
6
Press 
 to increase the brightness or contrast, or press 
 to decrease the brightness or contrast.
7
When the adjustment is complete, press 
.
This saves this setting as the new user default, and the printer returns to Ready.
Disabling operator panel menus
Since many people could be using the printer, an administrator may choose to lock the operator panel menus to keep 
others from changing menu settings from the operator panel.
To disable the operator panel menus so that changes cannot be made to the printer default settings:
1
Turn the printer off.
Note: Disabling the operator panel menus does not prevent access to Print and Hold functionality.
2
Press and hold 
 and 
 while turning the printer on.
3
Release the buttons when you see a clock.
CONFIG MENU
 appears on the first line of the display.
4
Press 
 until the 
 appears next to Panel Menus, and then press 
.
5
Press 
 until the 
 appears next to Disable, and then press 
.
The following messages appear briefly: Submitting selection and Disabling Menus.
The operator panel returns to Panel Menus.
6
Press 
 until the 
 appears next to Exit Config Menus, and then press 
.
Activating Menu Changes
 appears. The menus are disabled, and the printer returns to Ready.