Lexmark 630 사용자 설명서

You can load up to 10 envelopes in the multipurpose feeder and 85 envelopes in the envelope feeder. 
Try a sample of any envelopes you are considering using with the printer before buying large 
quantities. See 

and

for instructions on loading an envelope.

When printing on envelopes:

To achieve the best possible print quality, use only high-quality envelopes that are designed 
for use in laser printers.

Set the Paper Source in the Paper Menu to MP Feeder, Manual Env, or Env Feeder 
depending on the source you are using, set the paper type to Envelope, and select the 
correct envelope size from the operator panel, the printer driver, in the Local Printer Setup 
Utility, or from MarkVision.

For best performance, use envelopes made from 75 g/m

2

 (20 lb bond) paper. You can use up 

to 105 g/m

2

 (28 lb bond) weight for the multipurpose feeder or 105 g/m

2

 (28 lb bond) weight 

for the envelope feeder as long as the cotton content is 25% or less. Envelopes with 100% 
cotton content must not exceed 90 g/m

2 

(24 lb bond) weight.

Use only new, undamaged envelopes.

For best performance and to minimize jams, do not use envelopes that:
–

Have excessive curl or twist.

Are stuck together or damaged in any way.

Contain windows, holes, perforations, cutouts or embossing.

Use metal clasps, string ties, or metal folding bars.

Have an interlocking design

Have postage stamps attached

Have any exposed adhesive when the flap is in the sealed or closed position

Have nicked edges or bent corners

Have rough, cockle, or laid finishes

Use envelopes that can withstand temperatures of 205°C (401°F) without sealing, excessive 
curling, wrinkling, or releasing hazardous emissions. If you have any doubts about the 
envelopes you are considering using, check with the envelope supplier.

Adjust the width guide to fit the width of the envelopes.

Load envelopes with the flap side down, and position the short edge nearest the return 
address to enter the printer first for the multipurpose feeder. See 

 for instructions on loading an envelope. Also, see 

 for loading envelopes in this option.

Load only one size of envelope at a time in the envelope feeder.

A combination of high humidity (over 60%) and the high printing temperatures may seal the 
envelopes.