HP (Hewlett-Packard) Pro B9180 전단

A General Guide for Printing on Hahnemühle FineArt Papers

Please refer to your printer manual for a detailed instruction how to install profiles for your printer.

Note: 

Your graphic-application needs to be restarted if it was open when profiles were installed. New  profiles will 
be detected automatically during the start of the application.

Print drivers will vary from printer to printer and from Macintosh to PC but the general setup will be the 
same. Be sure to select the proper profile for the printer, paper and ink combination you are using. In our 
profile names you will find the proper combination to use.

Example:  Your Profile name is “HFA_HPB9180_MK_PhotoRag“. It says that you are using a Hahnemühle Profile (HFA) 

for the HP B9180 printer ( HPB9180) loaded with Matte / Photo Black and Photo Rag.

1)  Source Space: Document 

2)  Profile: regarding to your paper and ink 

 combination 

3,4) Rendering  Intent,  Black  Point   Compensation: 

Needs  to  be  chosen  regarding  to  the  image 
you‘re  using.   Eventually  you  need  to  test. 
No  recommendation  possible.

5)  Media: Create your own paper with HP solu-

tion center, media-type table on page -2- 

6)  Quality: optimal 

7)  Mode: Colormanagement Off

Note: 

For traceable printing, please save the settings and recall these settings whenever you print. Varying these 
 settings could affect the outcome of your image. There are other factors that can also affect the output, if 
needed please refer to you printer manual or image manipulation program for additional color  management 
issues. The screen shots may vary in case of different systems.

April 2009 / Rev. 01