HP (Hewlett-Packard) 1280 사용자 설명서

CISS for HP Deskjet 1280 
 

Thanks for your purchasing our continuous ink system for HP Deskjet 1280. Our continuous ink system is 
the idea set for inkjet printer which can low down the printing cost. Before your using of CISS, pls kindly 
read the instruction with details. In this way, you can install this system without troubles then. 
     

 

 

1.General Guide 
 

1)components 
A. CIS system  1 set    B. Air filter   4pcs     C. support arm   2 sets    
D.Refill kit 4pcs       E. Instruction CD  1pc     F. pedestal for drawing air  1set 

  

  

 

 2) Opening box for inspection 

a. Check whether all the accessories are ready 

b. Check whether there is leakage of CIS system, whether the tubes has been separated from CISS. 

 
2.Printer testing 
  Check whether the printer is in normal condition, such as mechanical status, lubrication 
status etc. After installation of this system, it will not low down the printing precision, 
so you have no need to worry about that. 
 
 
3. Installation procedure: 
 

1) first step 

  

  

 

 Put the CISS on the right side of the      Open the air hole               Place the air filter into the air hole,  

printer,In the mean time, place all the                                    make sure that the thicker side is down  

tubes at correct position ( make sure the                                   the tank 

printer and ink tank should be in one level) 

 

2) Set up the CISS system 

  

  

 

Open the printer power                     Open the cover for the printer       Ink vehicle out