Fujitsu 2000 사용자 설명서

20

■

Before you install any system component, we recommend that you read the following sections.
These sections contain important ESD precautions, pre- and post installation instructions.

■

Electrostatic discharge (ESD) can damage your processor, disk drives, expansion boards, and other
components. Always observe the following precautions before you install a system component.

1 Do not remove a component from its protective packaging until you are ready to install it.

2 Wear a wrist grounding strap and attach it to a metal part of the system unit before handling

components. If a wrist strap is not available, maintain contact with the system unit throughout
any procedure requiring ESD protection.

■

Always observe the following before you install a system component:

1 Turn off the system power and all the peripherals connected to the unit before opening it.

2 Open the system according to the instructions in the housing installation manual.

3 Follow the ESD precautions before handling a system component.

4 Remove any expansion boards or peripherals that block access to the DIMM sockets or CPU

socket.

5 See the following sections for specific instructions on the component you wish to install.

●

 Do not attempt the procedures described in the following section unless

you are a qualified service technician.

Electric shock

05Carrol(19-24)

17/06/2000, 13:49

20