MGE UPS Systems EX30 사용자 설명서
Pulsar EX : 51032306XT/BB
MGE UPS SYSTEMS
34
1 long beep
…
!
…
…
…
…
-
+
%
-
+
1a
to
1d
1f
on/load energized
1e
off/power on
indicate the battery
charge level (here,
between 10% and 20%)
charge level (here,
between 10% and 20%)
c
case of a device not fitted with the
"automatic bypass" option 21 :
v
Pulsar EX will shut down after a delay
ranging from 100 ms to 1 minute depending
on the overload level;
on the overload level;
c
case of a device fitted with the
"automatic bypass" option 21 :
v
if the power is within the operating range,
after a delay ranging from 100 ms to 1 minute,
the load will be switched to the AC for
20s and then back to the UPS,
the load will be switched to the AC for
20s and then back to the UPS,
v
if the overload persists, Pulsar EX will
shut down and your loads will no longer
be supplied,
be supplied,
v
if the power is not within the operating
range, Pulsar EX will shut down after a
delay ranging from 100 ms to 1minute and
your loads will no longer be supplied.
delay ranging from 100 ms to 1minute and
your loads will no longer be supplied.
operation
(continued)
return of AC power
c
regardless of the point in the above
sequence at which AC power is restored,
Pulsar EX will switch to normal operation:
Pulsar EX will switch to normal operation:
load level
c
Pulsar EX is now running. Press and hold
down the test button 2 :
c
your loads are being supplied by
Pulsar EX.
c
your loads are being supplied by
Pulsar EX.
overload
c
overloading occurs if the power
consumption of the supplied loads exceeds
the rated output of Pulsar EX.
the rated output of Pulsar EX.
intermittent beeps
…
!
…
…
…
…
-
+
%
-
+
1a
flashing/overload
1f
on/load energized
1e
off/power on
flashing/power off
flashing/power off
…
!
…
…
…
…
-
+
%
-
+
1a
to
1d
1f
on/load energized
silence
1e
off/power on
flashing/power off
flashing/power off
indicate the load level
(here, between 90%
and 100%)
(here, between 90%
and 100%)