Fujitsu eLux NG S26361-F2600-L134 사용자 설명서
제품 코드
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
94
3.15.3 User Roaming
You can combine local authentication with another eLux NG feature: user roaming.
User roaming is transferring an active Windows terminal server session from one eLux NG
terminal to another. This is useful when you want to move to a terminal with certain hardware
– for example, with a special printer – without logging off from your current ICA or RDP
session. In user roaming, the terminal disconnects the session when you remove the smart
card (the processes continue to run on the server) and reconnects when you insert the smart
card in a second terminal, using the second device’s hardware settings (printer, drive
mapping).
All terminals that will be used for user roaming must have user roaming enabled in advance.
User roaming works with the following smart cards:
• CardOS
User roaming is transferring an active Windows terminal server session from one eLux NG
terminal to another. This is useful when you want to move to a terminal with certain hardware
– for example, with a special printer – without logging off from your current ICA or RDP
session. In user roaming, the terminal disconnects the session when you remove the smart
card (the processes continue to run on the server) and reconnects when you insert the smart
card in a second terminal, using the second device’s hardware settings (printer, drive
mapping).
All terminals that will be used for user roaming must have user roaming enabled in advance.
User roaming works with the following smart cards:
• CardOS
®
version “M2” or “M4”
Siemens GmbH
• SICRYPT
®
CryptoCard
Fujitsu Siemens Computers
They must be encoded with the users’ Citrix logon data (name, password, domain) using the
SICRYPT SMARTY 2 software. A certificate is not permitted.
User roaming requires a Fujitsu Siemens Computers card reader.
To configure eLux NG for user roaming
1. Set the smart card hardware settings as described in “3.15.1 Configuring Smart Card
2. Set the smart card security settings. In the Setup tab, click the Security subtab. From
the Smart card drop-down list, click to select the following:
• Always required A smart card is required when the Thin Client boots and during
the entire eLux NG session. If the user removes the card, the session will be
locked. A smart card and valid PIN are required to unlock the terminal.
locked. A smart card and valid PIN are required to unlock the terminal.
3. Click
Apply
and OK to close the Setup dialog box.
4. Configure one of the following sessions:
In the application definition, click to select Roaming.
Logon information is read directly from the card. The entries User, Password, Domain in
the application definition dialog will be ignored.
Note: The option Allow smart card logon (see “3.15.4 Citrix Logon”) cannot be
combined with user roaming.
Logon information is read directly from the card. The entries User, Password, Domain in
the application definition dialog will be ignored.
Note: The option Allow smart card logon (see “3.15.4 Citrix Logon”) cannot be
combined with user roaming.
5. Save your changes.
Activating the Roaming check box starts the terminal server session automatically. Log on to
a Windows session or unlocking a locked Windows session is reduced to inserting a smart
card and entering the user PIN for this card. The user logon data is dynamically read from the
smart card and used to connect to the terminal server. If the local user removes the smart
card, the terminal server session is disconnected. Therefore, certain settings must be defined
on the terminal server. For further information, consult the terminal server manual.