Enterasys Networks 4G4282-49 사용자 설명서

Memory Locations and Replacement Procedures

Matrix DFE-Gold Series Installation Guide B-7

DIMM Replacement Procedure

The DIMM is considered a field replaceable unit on both the 4G4202‐72 and 4G4282‐49.

Removing the DIMM

To remove the existing DIMM, proceed as follows:

Locate the DIMM connector on the main PC board. Refer to

Figure B‐2

Push the connector arms away from the DIMM, as shown in

Figure B‐7

, enough to

release the DIMM from the connector contacts.

Figure B-7 Removing Existing DIMM from 4G4202-72

or 4G4282-49

Pull the DIMM straight up and remove it from the connector contacts.

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive
electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones
de seguridad para evitar descargas de electricidad estática.

1 Connector arms

2 DIMM

3 Connector contacts