Asante Technologies 8000 사용자 설명서
Security Management
Page 4-11
Duplicated IP Detection and Trap
The duplicated IP detection and duplicated IP trap security measures allow
you to monitor the use of a single IP address by two stations.
you to monitor the use of a single IP address by two stations.
If you enable duplicated IP detection, the switch starts monitoring the
broadcast Address Resolution Protocol (ARP) traffic from all of its ports, to
detect duplicated IP address conditions. When duplicate IPs are used on the
system, the MAC addresses of both stations and the ports they accessed are
logged.
broadcast Address Resolution Protocol (ARP) traffic from all of its ports, to
detect duplicated IP address conditions. When duplicate IPs are used on the
system, the MAC addresses of both stations and the ports they accessed are
logged.
If you enable both duplicated IP detection and duplicated IP trap, the
designated trap receiver gets an alert each time a duplicated IP address is
used on the system. In order to send duplicated IP traps, duplicated IP
detection must be enabled.
designated trap receiver gets an alert each time a duplicated IP address is
used on the system. In order to send duplicated IP traps, duplicated IP
detection must be enabled.
By default, duplicated IP detection and trapping are enabled.
Enabling and Disabling Duplicated IP Detection
To enable or disable detection of duplicated IP addresses:
To enable or disable detection of duplicated IP addresses:
1
From the Configuration Menu, type t to access the Secu-
rity Management Menu.
rity Management Menu.
2
Type d to toggle duplicated IP detection.
Enabling and Disabling Duplicated IP Trap
To enable the sending of a trap when a duplicated IP is detected, you must
first enable duplicated IP detection. See the previous subsection, “Enabling
and Disabling Duplicated IP Detection.”
To enable the sending of a trap when a duplicated IP is detected, you must
first enable duplicated IP detection. See the previous subsection, “Enabling
and Disabling Duplicated IP Detection.”
To enable or disable the sending of a trap when a duplicated IP is detected:
1
From the Configuration Menu, type t to access the Secu-
rity Management Menu.
rity Management Menu.
2
Type i to toggle duplicated IP trap.
Viewing a List of Duplicated IP Addresses
To view a list of duplicated IP addresses that have been detected at the
IntraCore 8000:
To view a list of duplicated IP addresses that have been detected at the
IntraCore 8000:
1
From the Configuration Menu, type t to access the Secu-
rity Management Menu.
rity Management Menu.
2
Type l to display the duplicated IP list. A screen appears,