Asante Technologies 8000 사용자 설명서
Advanced Management
Page 4-22
Port members can be added to and deleted from a VLAN Group via the
VLAN Management Menu (see “Configuring Static VLAN Groups”). When
you add it to a VLAN, you configure a port to determine its participation in
the VLAN.
VLAN Management Menu (see “Configuring Static VLAN Groups”). When
you add it to a VLAN, you configure a port to determine its participation in
the VLAN.
The VLAN Untagged Set.
When you add a port member to a VLAN, it is
added to the untagged set by default. This means the frames sent out on this
port will be untagged. If you want the port to send tagged frames, you must
delete the port from the VLAN’s untagged set (see “Specifying Tagging or
No Tagging for a Port”).
port will be untagged. If you want the port to send tagged frames, you must
delete the port from the VLAN’s untagged set (see “Specifying Tagging or
No Tagging for a Port”).
No port can transmit both tagged and untagged frames on the same VLAN.
However, it is possible for a port to be a member of more than one VLAN,
and to transmit tagged frames for one VLAN and untagged frames for the
other.
However, it is possible for a port to be a member of more than one VLAN,
and to transmit tagged frames for one VLAN and untagged frames for the
other.
PVID - Egress Filtering.
For a port that receives untagged frames, you can
assign a Port VLAN ID (PVID). This determines that the port will send all
untagged frames to the VLAN whose VID matches the PVID (see
“Configuring VLAN Port Attributes”).
untagged frames to the VLAN whose VID matches the PVID (see
“Configuring VLAN Port Attributes”).
Receive Frame Type.
You can specify whether a port receives all frames, or
only tagged frames. If a port is configured to receive only tagged frames, any
untagged frames received by the port are dropped. In this case, the PVID has
not meaning, and it is set to 4095. Receiveing only tagged frames is
especially important for setting up inter-switch links. (For more information,
see “Configuring Port Receive Frame Type.”)
untagged frames received by the port are dropped. In this case, the PVID has
not meaning, and it is set to 4095. Receiveing only tagged frames is
especially important for setting up inter-switch links. (For more information,
see “Configuring Port Receive Frame Type.”)
Ingress Filtering.
In addition to Receive Frame Type, you can can also
specify that the port only accepts and passes on frames that are tagged with a
VID of a VLAN to which the port is a member. For example, if the port is a
member of VLAN 1, it will only accept tagged frames with VID 1 in the tag.
(For more information, see “Enabling and Disabling Port Ingress
Filtering.”.)
VID of a VLAN to which the port is a member. For example, if the port is a
member of VLAN 1, it will only accept tagged frames with VID 1 in the tag.
(For more information, see “Enabling and Disabling Port Ingress
Filtering.”.)
Independent vs. Shared Learning
One problem addressed by a VLAN is the routing of traffic to unknown
destination MAC addresses. Each VLAN maintains a table of learned
addresses, similar to the way traditional layer 2 bridges learn the addresses
of unknown destinations. Address learning for a VLAN can be independent
or shared; shared learning means that all VLANS on a switch share a single
address table. (See “Specifying Shared or Independent Address Learning.”)
destination MAC addresses. Each VLAN maintains a table of learned
addresses, similar to the way traditional layer 2 bridges learn the addresses
of unknown destinations. Address learning for a VLAN can be independent
or shared; shared learning means that all VLANS on a switch share a single
address table. (See “Specifying Shared or Independent Address Learning.”)