Asante Technologies 8000 사용자 설명서

Page B-1

The following MIB objects are those for which counters are displayed in the 
Statistics Counters screens shown in both the console and Web interface. 
The definitions and references are quoted from RFC 1516.

"This object is the number of frames of valid frame length that have been 
received on this port. This counter is incremented by one for each frame 
received on this port whose OctetCount is greater than or equal to 
minFrameSize and less than or equal to maxFrameSize (Ref: IEEE 802.3 
Std, 4.4.2.1) and for which the FCSError and CollisionEvent signals are not 
asserted.

This statistic provides one of the parameters necessary for obtaining the 
packet error rate. The approximate minimum time for rollover of this counter 
is 80 hours." 

Reference: IEEE 802.3 Rptr Mgt, 19.2.6.2, aReadableFrames

"This object is the number of octets contained in valid frames that have been 
received on this port. This counter is incremented by OctetCount for each 
frame received on this port which has been determined to be a readable 
frame (i.e., including FCS octets but excluding framing bits and dribble 
bits).

This statistic provides an indicator of the total data transferred.  The 
approximate minimum time for rollover of this counter is 58 minutes."

Reference: IEEE 802.3 Rptr Mgt, 19.2.6.2, aReadableOctets

"This counter is incremented by one for each frame received on this port 
with the FCSError signal asserted and the FramingError and CollisionEvent 
signals deasserted and whose OctetCount is greater than or equal to