Asante Technologies 8000 사용자 설명서

Page 3-13

To set the IntraCore 8000 to download its software over the network from a 
remote server, use the following procedure.

Open the Local Bootstrap Configuration Menu by typing 
b in Configuration Menu.

Open the Remote Bootstrap Configuration Menu by typ-
ing r in the Local Bootstrap Configuration Menu. The 
menu appears, as shown in Figure 3-7.

Figure 3-7   Remote Bootstrap Configuration Menu

IntraCore 8000  Bootstrap Configuration Menu

Bank 1 Image Version/Date:     1.10J/Dec 7 1999 12:14:38  (Running)
Bank 2 Image Version/Date:     1.00G/May 5 1999 17:32:18

Load Mode:         Remote
Boot Mode:         TFTP only
Boot Server IP:    192.168.54.150
Boot File Name:    c:\base\newcrc.ima
Retry Count:       5
Boot Bank:         1

<Cmd>      <Description>
  b         Set Boot Mode to BOOTP-TFTP
  t         Set Boot Mode to TFTP only
  l         Set Load Mode to LOCAL
  s         Set Boot Server IP Address
  f         Set Boot File Name
  c         Set Remote Boot Retry Count
  a         Toggle Boot Bank
  q         Return to Previous Menu

Command>