Asante Technologies 8000 사용자 설명서

Page 3-19

Use the following procedure to delete a trap receiver you have previously 
designated.

Open the SNMP Configuration Menu by typing n in the 
Configuration Menu.

Type d to Delete a Trap Receiver. A prompt for the entry 
of the trap receiver appears.

Enter the number of the entry you want to delete (1,2,3, 
or 4) and press Return.

The trap receiver is deleted from the SNMP Trap Receivers list.

The Port Configuration Menu allows you to manually configure each of the 
IntraCore 8000’s ports for port speed, duplex, and auto-negotiation. It also 
provides an overview of the entire IntraCore 8000 system’s port operating 
status.

To access the Port Configuration Menu, type p in the Configuration Menu. A 
System Module Map screen similar to Figure 3-9 appears.

Figure 3-9   System Module Map screen 

Choose the module for which you want to see a Port Configuration Menu. If, 
for example, you chose slot 1, you would see a screen similar to Figure 3-10.

System Module Map
=================

Please select one of the following slots

  Slot          Description (Module Type)
  ----          --------------------------------------
    1           24 10/100BaseTX ports Module (24-100TX)
    2           2 1000BaseX ports Module (2-GBIC)
    3           24 10/100BaseTX ports Module (24-100TX)
    4           2 1000BaseX ports Module (2-GBIC)
    5           <none>
    6           <none>
    7           <none>
    8           <none>
    9           <none>

Enter Module Number (1-8)>