Asante Technologies 8000 사용자 설명서
Spanning Tree Protocol
Page 4-5
Current STP Settings
The following settings are displayed in the Spanning Tree Configuration
Menu, as shown in Figure 4-1.
Menu, as shown in Figure 4-1.
Table 4-1 Spanning Tree Configuration settings
Setting
Description
STP Status
Whether spanning tree protocol is currently enabled or disabled.
Bridge ID
The Bridge Identifier of this bridge. The first part of the Bridge
ID is the Bridge Priority. (If the Bridge ID is shown as 8000
000094EE5080, the 8000 is the Bridge Priority. The remainder
is the MAC address of this bridge, which cannot be changed.).
ID is the Bridge Priority. (If the Bridge ID is shown as 8000
000094EE5080, the 8000 is the Bridge Priority. The remainder
is the MAC address of this bridge, which cannot be changed.).
Designated Root
The Bridge Identifier of the bridge that is currently the root
bridge for the spanning tree.
bridge for the spanning tree.
Root Port
The port this bridge will use to forward traffic to the root. If this
bridge is the root, the root port will be 0.
bridge is the root, the root port will be 0.
Root Path Cost
The cost as calculated by the spanning tree for messages to
reach the root. If this bridge is the root, the cost will be 0.
reach the root. If this bridge is the root, the cost will be 0.
Hello Time
The value of the timer currently being used by the bridge.
Maximum Age
The value of the maximum age timer currently being used.
Forward Delay
The value of the forward delay timer currently being used.
Bridge Hello Time
The value that will be used by the spanning tree if this bridge
becomes the root bridge.
becomes the root bridge.
Bridge Maximum Age
The value that will be used by the spanning tree if this bridge
becomes the root bridge.
becomes the root bridge.
Bridge Forward Delay
The value that will be used by the spanning tree if this bridge
becomes the root bridge.
becomes the root bridge.