Fujitsu RX330 사용자 설명서

42

Operating manual

 RX330 S1

Hardware installation

The following parts are required to install the server in 3rd party racks:

–

One left and one right telescopic rail (assembled) 

–

M5x10 screws with integrated plugwashers

I

–

Or, M5x10 screws with separate plugwashers can also be used. 
In this case, two plugwashers each must be fitted beforehand on 
the support uprights and the support bracket.

–

The descriptions and figures in this section refer to the current 
variable support.

Ê

Refer to the manual from the rack manufacturer for details of the mechanical 
installation and the climatic conditions.

V

For installation in 3rd party racks, it must be ensured that an air flow 
from the front to the back of the rack is guaranteed.

Ê

Fit the required original parts (support bracket or cable management 
system).

I

Under certain circumstances, you will not be able to use some of the 
parts from the rack installation kit supplied - you will need to use 
original 3rd party rack parts instead.

Ê

Remove the outer telescopic rail as described in 

 (

The lengths of the telescopic rails do not need to be adjusted with respect to 
each other for the installation in rack systems with 735 mm installation depth.

Ê

Secure the telescopic rails as described in section 

Ê

Mount the server (see section 

) and route 

the cables as described in the rack manual.