Fujitsu RX330 사용자 설명서
70
Operating manual
RX330 S1
Hot-plug power supply units
Hot-plug components
8.1.1
Remove the dummy module
The mounting location for the second hot-plug power supply unit contains a
dummy module. This dummy module must be removed before installing a
second power supply unit.
dummy module. This dummy module must be removed before installing a
second power supply unit.
Figure 16: Remove the dummy module
Ê
Loosen the fixing screw (1) and remove the dummy module from the second
power supply mounting location (2).
power supply mounting location (2).
V
CAUTION!
Store the dummy module in a safe place. If the power supply unit is
removed and not replaced with a new unit, the dummy module must be
reinstalled due to cooling, to comply with applicable EMC regulations
(regulations on electromagnetic compatibility) and to protect against fire.
removed and not replaced with a new unit, the dummy module must be
reinstalled due to cooling, to comply with applicable EMC regulations
(regulations on electromagnetic compatibility) and to protect against fire.
1
2
1
2