Fujitsu V4.90 사용자 설명서

6

 

  ServerView Remote Management Frontend

Preface

The type of window displayed in the Remote Management Frontend depends, 
on the one hand, on the hardware (iRMC, RSB etc.) which you use to establish 
the connection to the managed server and, on the other, on the interface which 
is provided in each case.

The Remote Management Frontend's displays and controls are adapted to the 
remote hardware via which you establish the connection to a managed 
PRIMERGY server:

–

In the case of a PRIMERGY server with an installed iRMC or iRMC S2, you 
can use either the Telnet/SSH “Remote Manager” application or the 
managed server's power management and console redirection window in 
the Remote Management Frontend's console area.

–

In the case of a PRIMERGY server with an installed RSB or RSB S2/ 
RSB S2 LP  (as of firmware version 6.4.57.29), the Telnet “Remote 
Manager” application is available to you in the Remote Management 
Frontend's console area once a connection has been established. 

Only in the case of RSB:
You can use the Remote Manager to redirect the display at the console of 
the managed server. In this way, you can access the BIOS setup and the 
RemoteView/Diagnose system tools on the managed server. 

–

In the case of a PRIMERGY server with an installed BMC with firmware 
version 2.x or higher, the managed server's power management and 
console redirection window is available in the Remote Management 
Frontend's console area after the establishment of a connection.

–

In the case of a blade server with a RemoteView Management Blade, the 
RemoteView Management Blade Telnet “Console Menu” application is 
available to you in the Remote Management Frontend's console area after 
the establishment of a connection. You can use the Console Menu to redirect 
the display at the consoles of the managed server blades. In this way, you 
can access the BIOS setup at the managed server blade.