Fujitsu RX900 S1 사용자 설명서
240
Maintenance Manual
RX900
S1
Front panel and external connectors
6. Remove all CPUMEMRs, see
I
Before removing the CPUMEMRs, take a note on the installation
slot number for each CPUMEMR. Make sure that you reinstall the
CPUMEMR in the slot it was located before the replacement.
slot number for each CPUMEMR. Make sure that you reinstall the
CPUMEMR in the slot it was located before the replacement.
7.
8.
12.3.3 Removing the USB board
Figure 146: Removing the USB board from the front panel module
Ê
Remove both screws (see circle).
Ê
Push the USB board backward out.