Fujitsu TX200 사용자 설명서

163

PRIMERGY TX200 S2 User’s Guide

Operatio

ns
after O
S

lation

Select a Teaming type with which you want to create a Team.

Select the following depending on the Teaming type selected accordingly:

• AFT type: "Adapter fault tolerance"

• ALB type: "Adaptive load balancing"

• SFT type: "Switch fault tolerance"

• FEC type: "FEC/802.3ad Static link aggregation"

• GEC type: "GEC/802.3ad Static link aggregation"

Select a LAN card to incorporate in the Team and click [Next].

Click [Finish].

Click [OK].

When the Teaming setting is completed, the following virtual adapter will be created.

• "Intel(R) Advanced Network Services Virtual Adapter"

Upper protocols will be bound with the main virtual adapter.

You cannot bind them with the LAN card consisting of a Team.

The IP address can be set in the main virtual adapter.

5.7.5 VLAN

■ Notes

When using a VLAN, note the following points.

• You can only have "NetBIOS over TCP/IP" enabled for up to four VLANs in the whole system.

• On a VLAN, do not use protocols other than TCP/IP.

• You can only set ten or less VLANs to a LAN port.

• When adding or deleting a VLAN, always use "Intel(R) PROSet". Do not disable or delete a VLAN

from the [Device Manager] or [Network and Dial-up Connections].

■ VLAN Configuration Procedure

Start up Intel

PROSet. The procedure differs depending on the OS being

used.

For Windows Server 2003

1. Click [Start] → [Control Panel] → [Intel(R) PROSet].

For Windows 2000 Server

1. Click [Start] → [Settings] → [Control Panel].

The [Control Panel] window appears.

2. Start up “Intel(R) PROSet”.

Select a LAN card to setup a VLAN and right-click it.