Fujitsu TX200 사용자 설명서

238

Chapter 8  Configuring Hardware and Utilities

8.2.6 Peripheral Configuration Submenu

Configures the serial port, parallel port, etc. 

Multiprocessor Specification

1.4 (Fixed 
parameter)

Indicates the multiprocessor table version in use. 
The multiprocessor table is necessary for the operating 
system for multiprocessors to recognize the system's 
multiprocessor specifications.

table: Items on the Peripheral Configuration Submenu

Item 

Setting

Description

Serial 1

• Disabled
• Enabled
• Auto (at the time of 

purchase)

• OS Controlled

Configures Serial Port 1. 

Serial Multiplexer

• System (at the time of 

purchase)

• BMC
• Shared

Changes the function of Serial Port 1. 

• System

Used as a serial port.

• BMC

Used as a server management port. 

• Shared

The server does not support this yet.

Note: 
 Do not set to [Shared].

Serial 2

• Disabled
• Enabled
• Auto (at the time of 

purchase)

Configures Serial Port 2. 

Parallel

Auto (Fixed parameter)

Configures the parallel port. 

table: Items on the Advanced Menu

Item 

Setting

Description

PhoenixBIOS Setup Utility

Item Specific Help

Select Item
Select Menu

Change Values
Select > Sub-Menu

-/+
Enter

F1
Esc

Help
Exit

F9
F10

Setup Defaults
Save and Exit

Peripheral Configuration

Serial 1:
Serial Multiplexer:
Serial 2:
Parallel:
Parallel Mode:

Diskette Controller:
Floppy Type:
Local Bus IDE adapter:

Mouse Controller:

SCSI Controller:
SCSI Option ROM Scan:

LAN Controller:
LAN Remote Boot:

[Auto]
[System] 
[Auto]
[Auto]
[Bidirection]

[Enabled]
[Local]
[Both]

[Auto Detect]

[Channel A&B]
[Enabled]

[Enabled]
[Disabled]