Fujitsu TX150 S3 사용자 설명서

U41604-Z156-1-76

Options Guide

5

V

The actions described in these instructions should only be performed by 
technicians, service personnel or technical specialists. Equipment 
repairs should only be performed by authorized, qualified staff. Any 
unauthorized opening and improper repairs could expose the user to 
risks (electric shock, energy hazards, fire hazards) and could also 
damage the equipment. Please note that any unauthorized opening of 
the device will result in the invalidation of the warranty and exclusion from 
all liability.

Ê

First of all please familiarize yourself with the safety instructions in the 
section chapter “Safety notes” on page 7 et seqq. .

Ê

Ensure that all required manuals (see “Additional documentation about the 
server” on page 1) are available, printing out the PDF files if necessary. You 
will definitely need the Operating Manual for the server and the Technical 
Manual for the system board.

Ê

Shut down the server correctly, switch it off, pull out the power plug(s), and 
open the server as described in the chapter “Preparation” on page 13 et 
seqq. .

Ê

Extend or upgrade your server as described in the relevant chapter.

I

The Operating Manual for the server describes how you 
install/remove the hot-plug components.

I

Procedures which are identical for the floorstand and rack models are 
only described for the floorstand model.

Ê

Close the server, connect it to the power outlet, and switch it on as described 
in the chapter “Completion” on page 59 et seqq. .

Ê

Start the operating system and, if necessary, configure it as required (see 
the Operating Manual).