Toshiba Satellite R10 사용자 설명서
![Toshiba](https://files.manualsbrain.com/attachments/acaaaa9cc6b763ccfc72ced2ae95d9c94b8b8632/common/fit/150/50/8adbcbcd45c75dc53932fc9caf6f2740daed52d836b76efbd0162ac2599f/brand_logo.png)
4.29 LCD/digitizer harness & Wireless LAN antenna cables 4 Replacement Procedures
4-64
Satellite R10 Maintenance Manual (960 -509)
4.29 LCD/digitizer harness & Wireless LAN antenna cables
Removing the LCD/digitizer harness & wireless LAN antenna cables
The following describes the procedure for removing the LCD/digitizer harness & wireless
LAN antenna cables. (See Figure 4-43 and 4-44.)
LAN antenna cables. (See Figure 4-43 and 4-44.)
1. Pull out the wireless LAN antenna cables from the guide.
2. Remove the following screws and LCD harness holder.
?
M2.5x2.8B
FLAT BIND screw
x1
3. Remove the following screws and digitizer harness holder.
?
Unique screw CPU stud screw
x1
?
M2.5x6.0S
PSP TIGHT screw
x1
4. Remove the following screws securing the hinge assembly.
?
M2.5x6.0B
FLAT BIND screw
x1
?
M2.5x6.0S
PSP TIGHT screw
x1
5. Remove the hinge rear cover from the hinge assembly.
6. Detach the cover assembly from the display cover.
Figure 4-43 Removing the cover assembly
LCD harness holder
M2.5x2.8B FLAT BIND
M2.5x6.0B FLAT BIND
M2.5x6.0S PSP TIGHT
Digitizer harness holder
Hinge rear cover
CPU stud