Actron 9640A 사용자 설명서

다운로드
페이지 126
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •  6 – 21
 Ford Enhanced (OBD II) Diagnostics
6
Quick Tests
The Quick Tests checks the integrity and performance of the EEC-V and PTEC 
system. It is performed first in most diagnostic procedures and after servicing 
to verify the repair. 
Three Quick Tests are performed on all Ford vehicles. 
KOEO On Demand: Key On-Engine Off (KOEO) Self-Test.
KOER On Demand: Key On-Engine Running (KOER) Self-Test.
KOEO Output State.
Additional Quick Tests for OBD II 7.3L Powerstroke Diesel vehicles.
KOEO Injector Buzz Test
KOER Glow Plug Test
KOER Cylinder Contribution Test
KOER Switch Test. 
The list of available tests are displayed. 
If testing a 7.3L powerstroke diesel, 
more tests become available.
KOEO On Demand
The KOEO On Demand is a functional test of the computer modules and sys-
tem with the Key ON – Engine OFF (KOEO). It tests the  inputs, outputs, and 
sensor ranges. Any faults or DTCs will be retrieved by the scan tool.
It is VERY IMPORTANT that each step be performed when prompted by
the scan tool. Failure to follow directions may set DTC(s). 
Select KOEO On Demand from the 
Quick Tests screen and press 
ENTER
Follow the instructions displayed on the tool. 
1) Set Parking Brake.
2) Put Transmission In Park Or Neutral.
3) Turn A/C Off.
4) Start Engine — Let Idle Until Hot.
5) Turn Ign Key Off.
6) Wait 10 Seconds. Turn Key On-Engine Off. Do Not Start Engine.
7) For a 7.3L Diesel, depress/hold throttle during test.
For Gasoline engines, Do Not touch the throttle during test.
Press 
ENTER
 to begin the test. The 
Time Remaining will be displayed.
6)View Data     ]
7)View Freeze Data[
` 8)Quick Test     ~
Quick Tests
` KOEO On Demand
KOER On Demand
KOEO Output State ~
Test In Progress
|
Approximate 
Time Left 0:29 
Press BACK to Quit ~