Keurig KB31 사용자 설명서
12
Cleaning the K-Cup
®
Portion Pack
Holder Assembly
IMPORTANT: Make sure the Brewer is unplugged before cleaning.
K-Cup
®
Portion Pack Holder Assembly parts include:
Funnel
•
K-Cup Holder with Exit Needle
•
The K-Cup Portion Pack Holder Assembly parts can be placed on
the top shelf of the dishwasher. Use a low temperature cycle
when
cleaning.
1.
To remove the K-Cup Holder
Assembly from the Brewer,
lift the Brewer Handle to open.
Grasp the top of the K-Cup Holder
with one hand. With the other
hand, push up on the bottom of
the K-Cup Holder Assembly until
it releases (fig. 1).
Grasp the top of the K-Cup Holder
with one hand. With the other
hand, push up on the bottom of
the K-Cup Holder Assembly until
it releases (fig. 1).
Cleaning External Parts
IMPORTANT: Make sure the Brewer is unplugged before cleaning.
Regular cleaning of the Brewer’s external components is recommended.
• Brewer external housing
Drip Tray
•
Drip Tray Plate
•
BREWER
Never immerse Brewer in water or other liquids.
•
Clean the external housing of the Brewer and other external
•
components with a damp, non-abrasive, lint-free cloth.
DRIP TRAY AND DRIP TRAY PLATE
When the red Drip Tray Overfill Indicator appears, the Drip Tray is almost
•
full. Carefully remove by sliding tray toward you. Empty contents into the
sink.
sink.
Inspect the Drip Tray periodically and clean with a damp, non-abrasive,
•
lint-free
cloth.
Do not put the Drip Tray or the Drip Tray Plate in the dishwasher.
SECTION 5
Cleaning & Maintenance
fig.
1