Haier HSE10WNA 사용자 설명서

1. Remove all packaging material. This includes the foam base and all

adhesive tape holding the refrigerator accessories inside and
outside. Slide out and remove plastic or foam guard used to
secure the compressor from shipping damage due to vibration
and shock.

2. Inspect and remove any remains of packing, tape or printed

materials before powering on the refrigerator.

• Your refrigerator has two leveling legs which are located in the

front corners of your refrigerator. After properly placing your
refrigerator in its final position, you can level your refrigerator.

• Leveling legs can be adjusted by turning them clockwise to raise your

refrigerator or by turning them counterclockwise to lower
your refrigerator. The refrigerator door will close easier when the
leveling legs are raised.

• To assure your refrigerator works at the maximum efficiency it 

was designed for, you should install it in a location where there 
is proper air circulation, plumbing and electrical connections.

• The following are recommended clearances around the refrigerator:

Sides……………3/4 "(19mm)
Top....................2" (50mm)
Back..................2" (50mm)