Viking F20875 EN 사용자 설명서

다운로드
페이지 20
9
When adjusting temperature set points, use the following chart as a
guide.
The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C).
The set point range for the freezer is -5°F to 5°F (-21°C to -15°C).
Cooling On/Off
Your refrigerator and freezer will not cool when cooling is turned off.
• To turn cooling off, press and hold the LOCK and MEASURED FILL
buttons at the same time for 3 seconds.
IMPORTANT: To avoid unintentionally locking the dispenser or
changing other settings, be sure to press both buttons at exactly the
same time
When cooling is off, “Refrigeration Cooling is Off” will appear on the
display screen as shown.
• Press and hold LOCK and MEASURED FILL together for 3 seconds
again to turn cooling back on.
P
ro
d
u
ct
C
o
n
tr
o
ls
8
• The preset temperatures should be correct for normal household
usage. The controls are set correctly when milk or juice is as cold as
you like and when ice cream is firm.
• Wait at least 24 hours between adjustments. Re-check the
temperatures before other adjustments are made.
To view and adjust the set points, press and hold the TEMPERATURE
button for 3 seconds. When adjust mode is activated, adjusting
information will appear on the display screen.
NOTE: To view Celsius temperatures, press the LIGHT button when
adjust mode is activated. To return the display setting to Fahrenheit,
press LIGHT again.
• When adjust mode is activated, the display screen shows the
refrigerator set point and “REFRIGERATOR” appears.
• Press LOCK to raise the set point, or press OPTIONS to lower the set
point.
• When you have finished viewing (and adjusting if desired) the
refrigerator set point, press TEMPERATURE to change the display to
show the freezer set point. When the zone has been changed,
“FREEZER” appears on the display screen.
• Press LOCK to raise the set point, or press OPTIONS to lower the set
point.
• When you have finished viewing (and adjusting if desired) both the
refrigerator and freezer set points, press MEASURED FILL to save the
settings.
NOTE: To exit without saving changes, press ICE MODE at any time
while in adjust mode, or allow about 60 seconds of inactivity and
adjust mode will turn off automatically.
Using the Controls
(cont.)
Using the Control
(cont.)
P
ro
d
u
ct
C
o
n
tr
o
ls
Condition
Temperature Adjustment
Refrigerator too cold
Refrigerator setting 1° higher
Refrigerator too warm
Refrigerator setting 1° lower
Freezer too cold
Freezer setting 1° higher
Freezer too warm/too little ice
Freezer setting 1° lower