Behringer PMX5000 사용자 설명서
![Behringer](https://files.manualsbrain.com/attachments/6ab1e2498a85aa529592b168cb2e8cc17f1a1491/common/fit/150/50/b376cee50aa3ff3c6e7b555a433f356a3b2634da9977fe94a3791e15ad85/brand_logo.gif)
10
EUROPOWER PMX1000/PMX3000/PMX5000
5. WIRING EXAMPLES
5. WIRING EXAMPLES
Fig. 5.1: Stereo operation
For stereo operation the POWER AMP switch
must be set
to its upper position (MAIN or MAIN L/MAIN R). Outputs A and B
provide the stereo main signal for passive speakers. The preamp
monitor output is connected to two parallel active speakers,
which are used as on-stage monitors. Use the footswitch to
enable/disable the effects processor.
Fig. 5.2: Bridged mono operation
This illustration shows the power mixer with a sub-woofer
connected to OUTPUT B. For a bridged mono operation to
OUTPUT B, the AMP MODE selector switch
must be set to
its lower position BRIDGE. A separate stereo power amp
(BEHRINGER EUROPOWER EP1500) connected to the preamp
main outputs delivers the stereo main signal. Two active monitor
speakers for on-stage operation are connected to the preamp
monitor output.