Estate 2315225 사용자 설명서

■

Freezer door closed completely? Close the door firmly. If it 
does not close completely, see “The doors will not close 
completely.”

■

Refrigerator connected to a water supply and the supply 
shutoff valve turned on? Connect refrigerator to water 
supply and turn water shutoff valve fully open.

■

Is the water pressure at least 30 psi? The water pressure to 
the home determines the flow from the dispenser. See “Water 
System Requirements.” 

■

Kink in the home water source line? Straighten the water 
source line. 

■

New installation? Flush and fill the water system.

■

Water filter installed on the refrigerator? The filter may be 
clogged or incorrectly installed.

■

Is a reverse osmosis water filtration system connected to 
your cold water supply? See “Water Supply Requirements” 
in either the Installation Instructions or the Use & Care Guide. 

NOTE: One or two drops of water after dispensing is normal. 

■

Glass not being held under the dispenser long enough? 
Hold the glass under the dispenser 2 to 3 seconds after 
releasing the dispenser lever. 

■

New installation? Flush the water system. See “Ice and 
Water Dispensers.”

■

 Recently changed water filter? Flush the water system. See 
“Ice & Water Dispensers.”

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

■

New installation? Allow 24 hours after installation for the 
water supply to cool completely.

■

Recently dispensed large amount of water? Allow 24 hours 
for water supply to cool completely.

■

Water not been recently dispensed? The first glass of water 
may not be cool. Discard the first glass of water.

■

Refrigerator connected to a cold water pipe? Make sure 
the refrigerator is connected to a cold water pipe. See “Water 
Supply Requirements.” in either the Installation Instructions or 
the Use & Care Guide.