Liebherr 20707 사용자 설명서

u

Examine the unit and packaging for shipping damage.

Contact the carrier immediately if you suspect there is

any damage.

u

Note the type (model, number), index, appliance/serial

number, date of purchase and where purchased on the

spaces provided in see Appliance Information.

u

Remove anything attached to the rear or side walls of

appliance  that  would  prevent  proper  installation  or

impede proper ventilation.

If the appliance is set up in humid areas, condensation may

build on the outside of the appliance.

u

Always ensure proper ventilation.

Make sure you have the following tools on hand:
q

Hex wrench 13

q

Cordless screwdriver Torx 15, 20, 25, 30

Push the appliance 2/3 of the way into the recess.
Disconnect the power plug.
Open the doors.

Risk of injury if soft stop contracts!

u

Detach with care.

Fig. 1 

u

Unscrew retainer

 Fig. 1 (1)

.

u

Unscrew ball stud

 Fig. 1 (3)

 together with the soft stop

mechanism

 Fig. 1 (2)

 from the door and set to one side.

Fig. 2 

u

Lift off covers

 Fig. 2 (5,6,7,8)

 using a slot screwdriver.

u

Just loosen top and bottom screws

 Fig. 2 (9)

 on the body

of the appliance.

u

Push doors outwards and unhook.

u

Swap screws

 Fig. 2 (9)

 to the opposite side and screw

them in a little.

Risk of injury if hinges fold!

u

Leave hinges open.

u

Undo  screws

  Fig.  2  (10)

  and  change  over  the  hinges

diagonally.

The  screws

  Fig.  2  (10)

  are  self-tapping:  use  a  cordless

screwdriver.

u

Tighten the hinges.

u

Close  off  the  now  unused  fastening  holes  with  the

plugs

 Fig. 2 (11)

 supplied.

u

Hang doors on the pre-fitted screws

 Fig. 2 (9)

 and tighten

screws.

Fig. 3 

u

Screw on retainer

 Fig. 3 (1)

.