Broilmaster PC 사용자 설명서
Attach the Rear Brace (16) to the Left and
Right Side Assemblies with four ˘-20 x 3/4
screws (15). Figure 4.
Right Side Assemblies with four ˘-20 x 3/4
screws (15). Figure 4.
Important: Completely tighten all screws
at this time.
at this time.
4
C
ART
A
SSEMBLY
7
4
2
15
F
IGURE
5
Install one 1/4-20 x 3/4 phillips screw (15) into
the factory installed nut on the Left Side Assembly.
the factory installed nut on the Left Side Assembly.
Fasten the Cylinder Retainer (4) to the screw with
a wing nut (2). Adjust height to accommodate
your LP cylinder. Figure 5.
a wing nut (2). Adjust height to accommodate
your LP cylinder. Figure 5.
5
Slide the flanges of the Control Housing (5) behind
the opening. Allow the Control Housing to rest at
the bottom of the opening. Figure 6.
the opening. Allow the Control Housing to rest at
the bottom of the opening. Figure 6.
6
F
IGURE
6
F
IGURE
4
15
16