Panasonic KX-PS8100 사용자 설명서
29
Before You Start
Interface: SCSI interface requirements
SCSI cable:
SCSI-2 (FAST SCSI) compatible (
)
SCSI-2 board:
ASPI Manager compatible SCSI-2 board
(Adaptec AHA-2940 is recommended.)
(Adaptec AHA-2940 is recommended.)
ASPI manager:
ASPI Manager is required.
(See the SCSI-2 board manual.)
(See the SCSI-2 board manual.)
Parallel interface requirements
ECP mode:
ECP mode:
Based on the IEEE P1284-C standard
(An ECP compatible parallel port is
recommended for Windows 95.)
To turn on the ECP mode, use the computer’s
BIOS setup. Refer to the computer’s
documentation for details.
(An ECP compatible parallel port is
recommended for Windows 95.)
To turn on the ECP mode, use the computer’s
BIOS setup. Refer to the computer’s
documentation for details.
Cable: Appropriate interface cables for your network or
printer connection
To operate the KX-PS8100 system effectively, see the following.
CPU: More than PowerPC
(faster CPU is recommended.)
Operating system: Apple system software version 7.5.x, 7.6.x or 8.0
(Printer Driver)
Apple system software version 7.5.x, 7.6.x, 8.0, 8.1
or 8.5 (Scanner Driver)
Apple system software version 7.5.x, 7.6.x, 8.0, 8.1
or 8.5 (Scanner Driver)
Interface: Ethernet Card (Printing):
The KX-PS8100 Ethernet card does not enable
printing directly from the Macintosh computer.
Printing from a Macintosh can only be performed
if the KX-PS8100 and Macintosh are connected
to a network.
printing directly from the Macintosh computer.
Printing from a Macintosh can only be performed
if the KX-PS8100 and Macintosh are connected
to a network.
SCSI cable (Scanning):
SCSI-2 (FAST SCSI) compatible (
Cable: Appropriate interface cables for your network or
printer connection
To use ColorSync Color Matching of the scanner driver, ColorSync Manager
Version 2.0 or later is required.
Version 2.0 or later is required.
Photoshop Plug-in is supported on Adobe Photoshop 3.0 or later.
With a Macintosh
computer
computer