Panasonic KX-PS8100 사용자 설명서

Turn ON the scanner, then the printer. 

The scanner will be ready after approximately 20 
seconds, and “Ready”, “PTR Initializing” will be 
displayed on the scanner LCD panel.

a) The READY indicator on the printer starts flashing 

and “Initializing” is displayed on the printer LCD 
panel.

b) After approximately 3.5 minutes, the printer’s READY 

indicator is illuminated and “Ready” is displayed on 
the printer LCD panel.

The printer is ready for printing.

Turn ON the computer after “Ready” is displayed on the 
scanner and printer LCD panels.

•

When you power on your system for the first time, if “New Hardware 
Found” is displayed on the computer screen, 

•

If you use Macintosh 7500/7600/8500/9500, follow the procedure below. 
KX-PS8100 does not operate properly in the procedure above.

1. Turn on Macintosh 7500/7600/8500/9500.

2. Turn on the scanner, then the printer.

3. Check “

Ready

” is displayed on the scanner and printer LCD panels.