Multitech MTCBA-Xx-EN2-GP 사용자 설명서

 

MultiModem rCell User Guide  

34  

 

This chapter describes how to configure the router by using the Web Management software.  

This section explains the menu structure and the navigation buttons of the router’s Web Management software.   

 

You can select the following items from the menu bar: 

Sets up a General Configuration, HTTP, DDNS, SNTP, Static Routes, and Remote 
Configuration. 

Used to configure the PPP authentication, dial-on-demand, router authentication, and 
Wakeup on Call. 

Used to configure networks and services to make them available to other functions such as 
allowed packet filters, static routes, remote configuration, DNAT, and GRE tunnels and 
routes. 

Defines filter rules, DNAT configuration, and ICMP rules.

Used to define Generic Routing Encapsulation (GRE). Defines the remote network and the 
tunnel through which traffic is routed. 

Used to configure the DHCP server settings.

Allows the device to support LAN-to-LAN VPN tunneling with 3DES and AES 128-192-256 
encryption support 

Adds support for RS-232 serial port so that Ethernet and legacy serial devices can share the 
same cellular connection. 

Sets DDNS Force Update, displays DDNS Status, resets the modem, and provides interfaces
for Firmware Upgrade, Load Configuration, and Save Configuration. 

Shows statistics and logs maintained by the router.

Saves your settings and reboots your router. 

Opens the online Help file.

Nearly every page of the software’s interface includes a Submit button. This button allows you to save changes 
you make to the software pages and their parameters.  

To ensure your changes go into effect, you must eventually use Save & Restart, located on the Menu bar. You do 
not need to click Save& Restart after each change you make. You can change several areas, and then click Save & 
Restart.