Smeg SCP111NU2 사용자 설명서

This appliance is programmed to provide 3 operating settings, which can be modified by pressing PT2.

STAND-BY setting: with DSP1 on and showing the
current time (activated as soon as the current time has
been confirmed).

ON setting: from the stand-by setting, press PT2 once.
All the displays and knobs light up.

OFF setting: from the ON position, keep PT2 pressed

until it turns off. Only the 

 symbol on DSP1 remains

on.

When using for the first time, or after a power failure, the oven's left hand-display, DSP1, will show a

flashing 

 symbol. To start any cooking operation, the current time must be set.

Adjusting the current time:
•

turn PT1 to the right and left to increase or decrease the hours respectively. (

•

when PT1 is released, after a few seconds the display will stabilize and only the two dots that
separate the hours from the minutes will flash, indicating it is working properly. (

).

Note: It might become necessary to change the current time, for example at daylight savings time.
Starting from the stand-by setting, (see paragraph "5.3 Operating modes"):

•

hold down PT1 for a few seconds until the symbol 

 stops flashing.

•

repeat the operations described in paragraph “5.4.1 Setting the current time”.

In the ON status only, a cooking function can be selected by simply turning PT2 to the right or left. The
selected function will change color to red on the display. After the selection, the preset cooking
temperature will be displayed on DSP2.

After selecting the desired function, the oven will start the cooking procedure at the preset temperature

and the symbol 

 will come on. Cooking itself is preceded by a preheating stage, which allows the

oven to heat to the cooking temperature more quickly. The 

 symbol flashes on DSP2 to indicate that

this stage is in progress. When the preheating stage is over, the 

 symbol will remain on and a buzzer

will sound to indicate that the food can be placed inside the oven.