LSI 4714010328A 전단

다운로드
페이지 2
For more information please visit
the 
LSI Logic web site at:
http://megaraid.lsilogic.com
LSI Logic Corporation
RAID Storage Adapter Division
Norcross, GA
Tel: 866 828 9574
LSI Logic Europe Ltd.
European Headquarters
United Kingdom
Tel: 44 1344 413200
LSI Logic KK Headquarters
Tokyo, Japan
Tel: 81 3 5463 7165
LSI Logic Hong Kong Ltd.
Kowloon Tong, Hong Kong
Tel: 852 21952 1789
LSI Logic Asia, Taiwan Branch
Taipei, Taiwan
Tel: 866 2 2718 7828
ISO 9001 Certified
LSI Logic, the LSI Logic logo design and MegaRAID
are trademarks or registered trademarks of LSI Logic
Corporation. All other brand and product names
may be trademarks of their respective companies.
LSI Logic Corporation reserves the right to make
changes to any products and services herein at
any time without notice. LSI Logic does not assume
any responsibility or liability arising out of the
application or use of any product or service described
herein, except as expressly agreed to in writing
by LSI Logic; nor does the purchase, lease, or
use of a product or service from LSI Logic convey
a license under any patent rights, copyrights,
trademark rights, or any other of the intellectual
property rights of LSI Logic or of third parties.
Copyright ©2003 by LSI Logic Corporation.
All rights reserved.
Order No. S20089
10/03-2M – Printed in USA
2
MegaRAID Enterprise 1600
RAID Adapter
Adapter Specifications
Intel i960 RN 100 MHz I/O processor 
– Built-in hardware XOR engine for RAID parity
Universal 64-bit, 66 MHz PCI
PCI 2.2 compliant
Full length PCI card (12.3” x 4.2”)
I2O messaging unit
ACPI support
PC 99 compliant
0ne DIMM socket with 66 MHz 72-bit unbuffered 3.3 V ECC SDRAM 
– Configurable from 16 MB to 128 MB DIMM
Two Ultra160 LVD/SE dual SCSI controller
– Four external P68 VHDCI connectors  
– Two internal P68 HDCI connectors 
RAID Features
FlexRAID
– Online capacity expansion and RAID level migration
40 logical drives per controller and 32 physical drives per logical array
Background initialization for Quick RAID 5 setup
Auto resume during array rebuild or reconstructions if system shuts down
RAID levels 0, 1, 3, 5, 10, 30 and 50 supported
Variable stripe size for all logical drives
Supports multiple caching policies on a Logical Drive basis:
– Write-back/Write-through, Read ahead: Disable/Enable/Adaptive, and Cached/Direct I/O
Server clustering support
– Hardware support and MSCS
support via unified firmware
Multi-threading of up to 256 commands simultaneously
Universal Driver Suite
Novell
®
NetWare
®
4.2 and 5.X
Microsoft Windows NT
®
4.0/2000/XP
SCO
®
OpenServer 5.X
SCO
®
UNIXWare 7.1.X/Open UNIX 8 
DOS 6.XX
Linux Redhat 7.X
Win64 and Linux64 (when launched)
Online Management Utility Options
MegaRAID Configuration Console (JavaRAID) OEM option
– Web-enabled, OS independent configuration and management utility
Power Console
®
Plus for Windows NT/2000
– Creates and manages multiple disk arrays 
– Controls and monitors multiple RAID servers
MegaManager
– Advanced character-based configuration and management utility for all OSs supported
Pre Boot Configuration Utility Options
WebBIOS
– Browser-based BIOS configuration utility for point-and-click MegaRAID configuration
Hot key “Boot-up” configuration via BIOS
– Array and logical drive configuration utility at the BIOS level