Lexmark C772 설치 가이드

If you purchased an output option (finisher, expander, or mailbox), follow these steps:

Remove the top cover from the printer.

You will not need the cover when the output option is attached. Store the cover; it will be needed if you remove the 
output option.

Remove the option from the box, and follow the setup instructions included with the option.

Place the tips of the wire bail into the ends of the plastic bracket so that the bail curves downward.

The wire bail came with the printer and rests in the standard output bin when installed.

Attach the plastic bracket to the finisher, expander, or mailbox.

Go to 

Removing the print cartridge packaging on page 16, and follow the printer setup instructions. For 

information on installing the interface card and memory and firmware cards, go to 

option cards on page 19.