BTC 2001arf 사용자 가이드
3
3 Hardware
Installation
Step 1:
Make sure your PC is switched off.
Step 2:
Connect the receiver to your PC by plugging in the receiver’s green
connector into the mouse port of your PC and the purple connector into
the keyboard.
connector into the mouse port of your PC and the purple connector into
the keyboard.
Step 3:
Take the keyboard and make sure the batteries on the back are installed
correctly. (Follow the polarity signs in the battery compartment.)
correctly. (Follow the polarity signs in the battery compartment.)
ID Button
1.5V 2pcs
Step 4:
Take the mouse and make sure the batteries on the back are installed
correctly. (Follow the polarity signs in the battery compartment.)
correctly. (Follow the polarity signs in the battery compartment.)
ID Button
Remarks:
1. The keyboard uses 2pcs. standard UM-3 (AA) 1.5V alkaline batteries, and
1. The keyboard uses 2pcs. standard UM-3 (AA) 1.5V alkaline batteries, and
the mouse uses 2pcs. UM-4 (AAA) 1.5V alkaline batteries.
2. Battery life is approximately 3-4 months, depending on the intensity of
usage.
Mouse Connector
Keyboard Connector
Bottom View of Keyboard
Bottom View of Mouse