Toshiba M100 사용자 가이드
202
If Something Goes Wrong
Resolving a hardware conflict
5.375 x 8.375 ver 2.4.0
Your finger slides off the AccuPoint II easily.
If the AccuPoint II cap is oily, remove the cap and clean it
with a cotton swab dipped in rubbing alcohol.
with a cotton swab dipped in rubbing alcohol.
To remove the cap:
1
Firmly grasp the cap and pull it straight up.
Removing the AccuPoint II cap
2
After cleaning the cap, position it on the peg and press it
into place.
into place.
The peg is square, so be careful to align the cap’s hole with the
peg.
peg.
Display problems
Here are some typical display problems and their solutions:
The screen is blank.
Display Auto Off may have gone into effect. Press any key to
activate the screen.
activate the screen.
You may have activated the instant password feature by
pressing
pressing
Fn
and
F1
simultaneously. If you have registered a
password, press any key, type the password and press
Enter
. If
no password is registered, press any key. The screen
reactivates and allows you to continue working.
reactivates and allows you to continue working.
NOTE